The engineering details behind a two-tower aluminium system that lets you work over obstacles while operations continue below.
Outriggers clamp to the tower frames and widen the base, so the system stays steady at its configured height. Always fit them as specified before work begins.
Frames, braces and platforms connect with a quick-locking system — snap-in brace hooks and interlock clips — so a trained crew can assemble and dismantle the tower without spanners or loose bolts.
Castor wheels let you roll the tower to the next work area, and foot-operated brakes lock it in place before anyone climbs. Non-marking wheels protect finished floors such as marble and vitrified tiles, and adjustable legs level the tower on uneven ground.
A bridge platform spans 2.5 m to 6 m between two mobile towers, creating an overhead work area above machinery, equipment or obstructions.
Where bridge type aluminium scaffolding is used — overhead work that cannot stop what is happening underneath.
Every Bridge Type Scaffolding system is designed, manufactured and load-tested by Indoor Innovations at our own facility in Panipat, Haryana, so you always know who stands behind the equipment your team works on.
Frames, braces and platforms are fabricated in-house from 6063-T6 aluminium alloy at our Panipat plant, giving us full control over material quality and workmanship.
Every Bridge Type Scaffolding system is load-tested at our Panipat plant against its rated safe working load before it leaves the factory, so it arrives on site ready for safe use.
Designed to EN 1004, the European standard for mobile access towers, and IS 2750, the Indian scaffolding standard, under an ISO 9001:2015 certified quality management system.
Answers to the questions we hear most about Bridge Type Scaffolding.
Bridge type scaffolding connects two mobile aluminium towers with a spanning bridge platform. It creates a stable overhead working area so crews can work above machinery, equipment or obstructions.
Bridge widths are adjustable from 2.5 m to 6 m, so the span can be matched to the gap between the two towers on your site.
Yes. The bridge lets you work over machinery or obstructions while activities continue underneath.
Measure the clear gap you need to cross, from where one tower can stand to where the other can stand. The span must fall between 2.5 m and 6 m.
Yes. The bridge width and tower setup are configured for each site, based on the span, working height and floor conditions.
A two-person crew assembles Bridge Type Scaffolding without tools, using the quick-locking frames, snap-in brace hooks and interlock clips. How long it takes depends on the working height and configuration you need, and our team can also deliver and assemble it on site for you.
Not when assembled, as the two towers and the spanning bridge are wider than a standard single doorway. Bridge Type Scaffolding is dismantled into its frames, braces, bridge sections and platforms, all of which pass through a normal door, and reassembled on the other side without tools.
Yes. The platform can be fixed at any rung level on the frames, so you set it at the height the job needs, and adjustable legs fine-tune the height and level the tower on uneven floors.
Price depends on the span, working height and configuration. Share these details and whether you want to rent or buy, and our team will send a quote.
© All Rights Reserved by Indoor Innovations LLP
