The engineering details behind a single aluminium tower whose platform reaches out over obstructions.
Outriggers clamp to the tower frames and widen the base, so the system stays steady at its configured height. Always fit them as specified before work begins.
Frames, braces and platforms connect with a quick-locking system — snap-in brace hooks and interlock clips — so a trained crew can assemble and dismantle the tower without spanners or loose bolts.
Castor wheels let you roll the tower to the next work area, and foot-operated brakes lock it in place before anyone climbs. Non-marking wheels protect finished floors such as marble and vitrified tiles, and adjustable legs level the tower on uneven ground.
The platform extends horizontally beyond the base structure, so crews can reach over machinery, equipment or edges without repositioning the tower.
Where cantilever aluminium scaffolding is used — jobs where the tower cannot stand directly below the work.
Every Cantilever Scaffolding system is designed, manufactured and load-tested by Indoor Innovations at our own facility in Panipat, Haryana, so you always know who stands behind the equipment your team works on.
Frames, braces and platforms are fabricated in-house from 6063-T6 aluminium alloy at our Panipat plant, giving us full control over material quality and workmanship.
Every Cantilever Scaffolding system is load-tested at our Panipat plant against its rated safe working load before it leaves the factory, so it arrives on site ready for safe use.
Designed to EN 1004, the European standard for mobile access towers, and IS 2750, the Indian scaffolding standard, under an ISO 9001:2015 certified quality management system.
Answers to the questions we hear most about Cantilever Scaffolding.
Cantilever scaffolding is an aluminium tower with integrated cantilever sections that extend the working platform horizontally beyond the base structure.
Use it when you need to reach above machinery, equipment or other obstructions where the tower itself cannot stand directly underneath the work area.
No. The cantilever section extends the platform over the obstruction, so you can reach the work area without repositioning the entire tower.
Cantilever scaffolding uses one tower with a platform that reaches out to one side. Bridge type scaffolding uses two towers joined by a bridge that spans 2.5 m to 6 m across the obstruction.
The reach and working height are configured for each site. Tell us the horizontal distance from where the tower can stand to the work point, and the height you need, and our team will plan the setup.
A two-person crew assembles Cantilever Scaffolding without tools, using the quick-locking frames, snap-in brace hooks and interlock clips. How long it takes depends on the working height and configuration you need, and our team can also deliver and assemble it on site for you.
Not when fully assembled, as the tower is wider than a standard single doorway. Cantilever Scaffolding is dismantled into its frames, braces and platforms, all of which pass through a normal door, and reassembled on the other side without tools.
Yes. The platform can be fixed at any rung level on the frames, so you set it at the height the job needs, and adjustable legs fine-tune the height and level the tower on uneven floors.
Price depends on the reach, working height and configuration. Share these details and whether you want to rent or buy, and our team will send a quote.
© All Rights Reserved by Indoor Innovations LLP
